Our webshop is closed due to extraordinary demand. Please contact your local Silky dealer.
  • Contact


    • Silky Europe
    • Spectrum 38
      4706 NM Roosendaal
      Nederland
    •  
    • Phone: +31(0)165 532992
    • On weekdays between 8.30 AM - 5.00 PM

    • support@silky-europe.com

Pruning Saw Gomtaro 300-8

Pruning Saw Gomtaro 300-8

The Gomtaro pruning saw is an essential piece of your equipment and a user’s first choice for formative pruning during the early years of a tree’s growth. The straight blade gives an even cleaner and more precise cut than a curved blade. The smooth tree cut that this pull saw leaves behind will easily be overgrown. The tree will be grateful!

  • Blade length: 300 mm (till Ø 150 mm)
  • Teeth: large (8 teeth per 30 mm)
  • Suited for fresh wood
  • Limited lifetime warranty
€67.00
  • Made in Japan - Since 1919
  • Unique quality
  • Limited Lifetime Warranty
New!
saw-selector-static-image

Especially for you

Product description

The Gomtaro pruning saw is an essential piece of your equipment and a user’s first choice for formative pruning during the early years of a tree’s growth. The straight blade gives an even cleaner and more precise cut than a curved blade. The smooth tree cut that this pull saw leaves behind will easily be overgrown. The tree will be grateful!

A straight blade is easier to handle in tight spaces and close to the ground. The Gomtaro is recommended among skilled arborists when removing the crown of a tree. For making a felling cut, the straight blade helps you to manipulate hinge wood while maintaining a straight back cut. If you use Silky for the first time, then be aware of this razor-sharp saw!

The physical exercise of tree climbing demands a saw that eases the pruning. Rightly so, professionals choose Silky as their hand saw. Sawing with the Gomtaro requires a minimum effort and goes so smoothly that firing up a chainsaw is unnecessary. Moreover, you now have a compact replacement at hand for when a chainsaw is not available or for when you can only use one hand. The rubber casted handle lays comfortably in your hand and absorbs vibrations. You will realize that your lower arm and the saw are perfectly balanced out.

While climbing you will not always move in the most comfortable positions. Even then, the Gomtaro will not let you down. The scabbard is designed in such a way so that it will hold the saw in all positions, but when needed you can pull the saw out with just one hand. Complete your Gomtaro with the available leg straps and you will always have the saw at arm’s length.

Components

Description series

The Gomtaro with large teeth is suited for fresh wood and available in six blade lengths: 180 - 210 - 240 - 270 - 300 and 330 mm. The fine teeth is suited for seasoned wood and available in four blade lengths: 240 - 270 - 300 and 330 mm. Blades with similar lengths are interchangeable, creating one multipurpose saw.

All saws from the Gomtaro series come with a lightweight, polypropylene scabbard with detachable belt holder. The scabbard is incorporated with two rollers to prevent the sharp teeth damaging the case. The bottom part is equipped with a hole that drains moist and saw dust.

Technical specifications

  • Authentic Premium Japanese Steel
  • Blade length: 300 mm
  • Teeth: 8 teeth per 30 mm
  • Dimensions: 470 x 110 x 40 mm
  • Weight: 395 g
  • Kerf: 1.4 mm

The blade must be kept clean to maintain its efficiency. Resin dissolves in olive oil, which is an effective and environmental friendly way to maintain the blade with. More aggressive liquids can damage the rubber material of the handle.

When not using the saw, make sure it is dry at all times. Store the saw in its scabbard in a dry place.

Customer service